Call Us
Send Inquiry    Call Me Free
Gas Permeation Rate Measurement System

Gas Permeation Rate Measurement System

10000.00 - 130000.00 USD ($)/Set

Product Details:

  • Specimen Size 38.48 cm2 (70 mm) Millimeter (mm)
  • Gas Pressure 0.4 MPa~0.6 MPa kgf/m2
  • Number of Specimens 1
  • Temperature Room temperature~50 Celsius (oC)
  • Test Range 0.1~100,000 cm3/m2/24h/0.1MPa (standard volume)
  • Power Supply 220VAC 50Hz / 120VAC 60Hz
  • Port Size 6 mm PU Tubing
  • Click to View more

Gas Permeation Rate Measurement System Price And Quantity

  • 10000.00 - 130000.00 USD ($)/Set
  • 1 Set

Gas Permeation Rate Measurement System Product Specifications

  • micro computer controlled
  • 36 kg Kilograms (kg)
  • 1
  • 0.4 MPa~0.6 MPa kgf/m2
  • 38.48 cm2 (70 mm) Millimeter (mm)
  • 220VAC 50Hz / 120VAC 60Hz
  • 6 mm PU Tubing
  • 0.1~100,000 cm3/m2/24h/0.1MPa (standard volume)
  • Room temperature~50 Celsius (oC)

Gas Permeation Rate Measurement System Trade Information

  • Jinan
  • 10 Set Per Week
  • 7 Days
  • Standard Veneer Case
  • All India
  • ISO 9001, CE

Product Description

VAC-V1 Permeation Rate Measurement System  is based on the differential pressure method to test gas transmission rate of plastic films, composite films, high barrier materials, sheeting, metal foils, rubber, tires and permeable membranes.

The test can be performanced as follows:

The pre-conditioned specimen is mounted in the gas diffusion cell as to form a sealed barrier between two chambers. The lower-pressure chamber is firstly evacuated, followed by the evacuation of the entire cell. A flow of gas is thereafter introduced into the evacuated higher-pressure chamber and a constant pressure difference is generated between the two chambers. The gas permeates through the specimen from the higher pressure side into the lower side. The gas permeability and other barrier properties of the specimen can be obtained by monitoring the pressure changes in the lower chamber.


  • Test modes: proportional mode and standard mode
  • Test range could be extended
  • Temperature control
  • Controlled by computer 
  • Test process is automatic
  • RS232

Technical Specification


Film Test

Test Range

0.05 ~ 100,000 cm3/m224h0.1MPa (standard volume)

At least 600,000 cm3/m224h0.1MPa (extended volume)

Number of Specimens


Vacuum Resolution

0.1 Pa

Vacuum Degree of Test Chamber

<20 Pa


Room temperature ~ 50C 0.5C

Specimen Size

97 mm

Test Area

38.48 cm2 (70 mm)

Test Gas

O2, N2 and CO2 (outside of supply scope)

Test Pressure

-0.1 MPa ~ +0.1 MPa (standard)

Gas Supply Pressure

0.4 MPa ~ 0.6 MPa

Port Size

6 mm PU Tubing

Instrument Dimension

680 mm (L) x 565 mm (W) x 550 mm (H)

Power Supply

220VAC 50Hz / 120VAC 60Hz

Net Weight

130 kg

For more, please view

Enter Buying Requirement Details
Email Id
Mobile number

Other Products in 'Water Vapor Transmission Rate Tester' category

Back to top
trade india member
LABTHINK INSTRUMENTS CO. LTD. All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Private Limited.