Air Permeability Tester for battery IQC

50000 USD ($)/Set

Get a Price/Quote

Product Details:

Specimen Size 16 mm
Automation Grade Automatic
Response Time Instantaneous, <2 seconds
Power Supply AC 220V 50Hz
Humidity 20-90% RH (non-condensing)
Gas Pressure 0.10.6 MPa
Equipment Type Air Permeability Tester
Click to View more
Share Your Product:

Request to Call Back Send Inquiry

Air Permeability Tester for battery IQC Price And Quantity

Price Range 50000.00 - 100000.00 USD ($)/Set
Price 50000 USD ($)/Set
Minimum Order Quantity 1 Set

Air Permeability Tester for battery IQC Product Specifications

Display Type Digital LCD
Machine Weight About 25 kg
Equipment Type Air Permeability Tester
Power Supply AC 220V 50Hz
Humidity 20-90% RH (non-condensing)
Gas Pressure 0.10.6 MPa
Control Mode Touchscreen PLC control
Response Time Instantaneous, <2 seconds
Specimen Size 16 mm
Automation Grade Automatic
Interface Type RS232/USB
Application Battery separator air permeability test for IQC
Operating Voltage AC 220V10%, 50Hz
Temperature 10-40C
Test Width 100 mm
Max Height 300 mm
Number of Specimens 1
Frequency 50 Hz
Test Stroke 0-50 mm
Port Size 6 mm
Mounting Type Benchtop
Test Range 0.199999 ml/min
Usage Laboratory IQC
Capacity Single station
Test Speed Adjustable up to 200 mm/min
Accuracy 2% FS
Resolution 0.01 ml/min
Features Automatic operation, Data storage, Overpressure protection
Measuring Range 0.1-10000 ml/(mincm)

Product Description

Product FeaturesNote1

The instrument is controlled by computer with automatic test process
Touch screen, easy to learn and easy to operate
Imported high precision pressure sensors are used, which guarantees the testing accuracy and repeatability
Imported pneumatic control system with ultra-low failure rate and extremely long service life, which guarantees the seal performance of the whole system
Environmental temperature and humidity are monitored and recorded in real time
3 equivalent specimens can be tested simultaneously with the average value as test result
Pressure curves are displayed in real time for observation and analysis of the permeation process
The system supports unit conversion function to meet users requirements for special test
Customizations are available for special testing function, specimen size or test pressure

Test Principle

Under certain temperature and humidity, a constant gas differential pressure is generated between the two sides of specimen. The gas transmission rate and other parameters can be obtained by analyzing and calculating pressure changes in the lower pressure side.

Test StandardNote1

ISO 5636, SJT 1071.9, GB/T 36363-2018

ApplicationsNote1

Basic Applications
Test the gas permeability of battery diaphragms, breathable films and other relative polymer products.

Technical SpecificationsNote2

Specifications	BTY-B3P Gas Permeability Tester
Test Range	10 10,000 s/in2100 mL1.21KPa
Pressure Range	0 20 KPa (customization is available for others)
High Pressure Resolution	0.01 KPa
High Pressure Accuracy	0.05 KPa
Low Pressure Resolution	0.1 Pa
Low Pressure Accuracy	0.3 Pa
Specimen Size	12 mm12 mm
Test Area	0.019 sq.in. (12.56 mm2) Customization available for other test areas
Number of Specimens	3, 2 or 1
Test Gas	O2, N2, CO2 and 99.9% dry gas (outside of supply scope)
Gas Supply Pressure	0.6 Mpa (87 psi)
Port Size	I4 mm PU Tubing
Power Supply	220VAC10% 50Hz / 120VAC10% 60Hz
Instrument Dimension	390 mm (L) 433 mm (W) 410 mm (H)
Net Weight	27 kg

Configurations

Standard Configurations: Instrument, Computer, Professional Software, I4 mm PU Tubing (2.5m)

Note: 1. The gas supply port of the instrument is I4 mm PU tubing;
2. Customers need to prepare gas supply.

Note 1: The described product features, applications and test standards should be in line with Technical Specifications.
Note 2: The parameters in the table are measured by professional operators in Labthink laboratory under strictly controlled laboratory conditions.

Advanced Air Permeability Testing Technology

Leverage the controlled airflow method with precise pressure differentials to measure battery separator permeability. The pneumatic clamping and automatic calibration system ensure repeatable and consistent results every time, ideal for IQC laboratory environments.

Enhanced Usability and Safety Features

Operate the tester with confidence, thanks to its digital LCD, intuitive touchscreen PLC control, and quick specimen changeouts via pneumatic drive. Built-in safety components, including an emergency stop and overpressure alarm, minimize risks during operation.

Efficient Data Management and Export Options

Conveniently export test results through USB or RS232, or utilize serial printing to document outcomes. Integrated data storage allows for record keeping and traceability, streamlining your battery separator evaluation workflow.

FAQ's of Air Permeability Tester for battery IQC:

Q: How does the Air Permeability Tester work for battery IQC applications?

A: The tester operates using a controlled airflow technique with precise pressure differentials to measure how easily air passes through battery separators. This method ensures accurate and repeatable results during incoming quality control.

Q: What are the key benefits of using this tester in a laboratory setting?

A: Key benefits include automatic calibration, fast response time (under 2 seconds), digital LCD readout, and a wide measuring range. Additional advantages are the pneumatic safety lock, emergency stop button, and data export capabilities for convenient documentation.

Q: When should I perform calibration and is it difficult?

A: Calibration should be conducted according to your standard laboratory routine or whenever accuracy verification is required. The instrument provides built-in automatic calibration, simplifying the process and ensuring consistent results without user intervention.

Q: Where is the Air Permeability Tester best installed for optimal performance?

A: The tester should be installed in a dust-free, vibration-free workspace to ensure optimal measurement accuracy. Its benchtop design makes it perfect for laboratory environments designated for IQC of battery components.

Q: What is the typical process for testing a battery separator?

A: Simply prepare a 16 mm specimen, place it in the single-station chamber, and utilize the pneumatic drive for secure clamping. Set the appropriate parameters on the touchscreen, and initiate the test. Results appear almost instantaneously and can be stored or exported.

Q: How is data exported from the device?

A: Results can be exported via USB interface or RS232 port, and there is also an option for serial printing, allowing for flexible data management in electronic or physical records.

Q: What makes this tester suitable for battery separator IQC?

A: Its accuracy (2% FS), adjustable speed, automated features, safety functions, and capacity to test a range of permeability make it specifically tailored for evaluating battery separators in incoming quality control settings.

Tell us about your requirement

Price:

Quantity

Select Unit

50
100
200
250
500
1000+

Additional detail

Mobile number

Other Products in 'Gas Permeability Testers' category

Protein Powder Packaging Oxygen Barrier Testing Instrument Price : 50000 USD ($)/Set Minimum Order Quantity : 1 Gas Pressure : 0.4 0.8 MPa Humidity : 3090% RH Power Supply : AC 220V 10% 50Hz Display Type : LCD Touchscreen Display Machine Weight : Approx. 60 kg Equipment Type : Oxygen Barrier Tester Automation Grade : Fully Automatic Specimen Size : 50 mm x 50 mm (standard) Response Time : 6 Seconds Control Mode : Microprocessor / Touch Screen Application : Protein Powder Packaging Oxygen Permeability Test Operating Voltage : 220V Temperature : 15C 45C Interface Type : RS232/USB Max Height : 250 mm Number of Specimens : 1 3 Test Width : Up to 100 mm Frequency : 50 Hz Mounting Type : Table Top Port Size : 1/8 inch Test Stroke : 0150 mm Test Speed : Adjustable 250 mm/min Usage : Oxygen Permeability Testing Capacity : High stability for protein/food packaging Test Range : 0.01 1000 cc/m2day Measuring Range : 0.011000 cc/m2day Resolution : 0.01 cc/m2day Features : Multimode operation, Alarm system, Trend analysis Accuracy : 1% of reading Hardness : Industrialgrade build

Send Inquiry

Specialized Gas Transmission Rate Test Instruments for Packaging Quality Control Price : 50000 USD ($)/Set Minimum Order Quantity : 1 Gas Pressure : 00.3 MPa (adjustable) Humidity : 10%90% RH (adjustable) Power Supply : AC 220V, 50 Hz Display Type : Large LCD Touch Screen Machine Weight : About 45 Kg Equipment Type : Gas Transmission Rate Test Instrument Automation Grade : Fully Automatic Specimen Size : 97 mm diameter Response Time : < 10 seconds Control Mode : Microprocessor Controlled Application : Packaging Quality Control for Film, Sheet, Laminates, Bottles, Containers Operating Voltage : 220V AC 10% Temperature : 15C55C (programmable) Interface Type : RS232; USB Max Height : 400 mm Number of Specimens : 13 (simultaneously) Test Width : Up to 100 mm Frequency : 50 Hz Mounting Type : Benchtop Port Size : 1/8 inch (standard) Test Stroke : 0200 mm (adjustable) Test Speed : 0.11000 ml/m2d (adjustable) Usage : Laboratory/Industrial Capacity : Multimode/3 independent chambers Test Range : 0.15000 ml/m2d Measuring Range : 0.0150,000 ml/m2datm Resolution : 0.01 ml/m2d Features : Automatic, MultiTest Data Storage, Leak Detection Accuracy : 1% FS Hardness : Industrial Durable

Send Inquiry

Graphene Helium Barrier Testing by Pressure Difference Measurement Price : 50000 USD ($)/Set Minimum Order Quantity : 1 Gas Pressure : 01 MPa (adjustable) Humidity : 3070% RH Power Supply : AC 220V, 50 Hz Display Type : Digital LCD Machine Weight : Approx. 40 kg Equipment Type : Graphene Helium Barrier Tester Automation Grade : Automatic Specimen Size : 1050 mm diameter Response Time : 2 sec Control Mode : Automatic/Manual selectable Application : Barrier property measurement of graphene films and membranes Operating Voltage : 220 V Temperature : 10C to 40C Interface Type : USB/Ethernet Max Height : 400 mm Number of Specimens : 13 Test Width : 50 mm Frequency : 50 Hz Mounting Type : Benchtop Port Size : 1/4 inch NPT Test Stroke : Max 250 mm Test Speed : User selectable, 0.120 mm/min Usage : Helium barrier test measurement Capacity : 5 L Test Range : 01000 mbar Measuring Range : 0.01 to 100 sccm Resolution : 0.01 mbar Features : High sensitivity, leak detection, auto data logging Accuracy : 0.5% F.S.

Send Inquiry

Packaging CTR Testing to Extend Fruit Shelf Life Price : 50000 USD ($)/Set Minimum Order Quantity : 1 Gas Pressure : 0.4~0.6 MPa Humidity : 20% 90% RH Power Supply : AC 220V 10%, 50Hz Display Type : LCD Digital Display Machine Weight : 68 Kg Equipment Type : Packaging Testing Equipment Automation Grade : Automatic Specimen Size : Customized Response Time : 2 seconds Control Mode : Microcomputer Control Application : Extend Fruit Shelf Life, Packaging Testing Operating Voltage : 220V AC Temperature : 15C 40C Interface Type : RS232 Max Height : 650 mm Number of Specimens : 15 pieces Test Width : 0300 mm Frequency : 50 Hz Mounting Type : Tabletop Port Size : Standard 8 mm Test Stroke : 600 mm Test Speed : 5100 mm/min adjustable Usage : Lab and Industrial Capacity : 50 N Test Range : 050 N Measuring Range : 050 N Resolution : 0.01 N Features : High Sensitivity, User Friendly Accuracy : 1% FS

Send Inquiry

SEND INQUIRY CALL ME FREE