90 Degree Peel Testers

50000 USD ($)/Set

Get a Price/Quote

Product Details:

Power Supply 230V AC, 50Hz, single phase
Measuring Range 0500 N
Interface Type USB/RS232 (optional)
Frequency 50 Hz
Automation Grade Semi-automatic
Max Height Approximately 600 mm
Application Adhesive strength measurement, laminate, tape and label peel testing
Click to View more
Share Your Product:

Request to Call Back Send Inquiry

90 Degree Peel Testers Price And Quantity

Minimum Order Quantity 1 Set
Price 50000 USD ($)/Set
Price Range 50000.00 - 100000.00 USD ($)/Set

Motor Type Precision stepper motor drive
Data Storage Internal memory and USB export supported
Safety Emergency stop button, safety shield provided
Calibration Supplied with calibration certificate
Operating System Windows compatible software (optional)
Peel Angle Fixed at 90°
Clamp Type Self-tightening grips
Body Material Powder coated MS & stainless steel

90 Degree Peel Testers Product Specifications

Test Width Maximum 150 mm
Interface Type USB/RS232 (optional)
Power Supply 230V AC, 50Hz, single phase
Measuring Range 0500 N
Automation Grade Semi-automatic
Max Height Approximately 600 mm
Frequency 50 Hz
Control Mode Microprocessor based digital control
Application Adhesive strength measurement, laminate, tape and label peel testing
Usage Laboratory and quality control
Machine Weight approx. 45 kg
Display Type Digital LED display
Humidity Up to 85% RH (Non-condensing)
Equipment Type 90 Degree Peel Tester
Number of Specimens Single specimen per test
Test Stroke 500 mm
Features Automatic data recording, speed control, over-load protection
Mounting Type Table-top
Test Range 0500 N
Specimen Size Up to 150 mm wide
Resolution 0.1 N
Test Speed 10300 mm/min (adjustable)
Response Time Immediate digital readout
Temperature 10C 40C
Operating Voltage 230V AC
Capacity 500 N
Accuracy 0.5% of reading
Port Size Standard grip size for peel testing

Motor Type Precision stepper motor drive
Data Storage Internal memory and USB export supported
Safety Emergency stop button, safety shield provided
Calibration Supplied with calibration certificate
Operating System Windows compatible software (optional)
Peel Angle Fixed at 90°
Clamp Type Self-tightening grips
Body Material Powder coated MS & stainless steel

Product Description

Product FeaturesNote1

Professional Test Modes to Meet Various Testing Demands

Multiple independent test modes including tensile test, peel test, tearing test, heat seal test, tensile test at fixed elongation, and compression test, etc. at users choice
The instrument supports bidirectional testing modes and test speed can be adjusted freely
Intelligent designs of over-travel protection, overload protect and automatic position reset guarantee safe test operation of the users

Excellent Testing Mechanism & Improved Test Accuracy

Force measuring system is supplied by top global supplier, which ensures the testing accuracy of better than 0.5% of full scale and guarantees accurate test results and good repeatability. Multiple test ranges can be selected freely.
Servo control system powered by top global supplier and the patented high-precision ball screw multi-point positioning technology provide displacement accuracy of better than 0.5% of full scale and infinitely variable speed, facilitate the instrument with simplified and stable operation.
Global renowned brand pneumatic control system supports pneumatic specimen clamping, which avoids the specimen slipping and guarantees the accuracy of test data

High-end, Secure and Easy-to-Use Embedded Computer-controlled System

Large size touch screen tablet for better viewing and easy operation
Brand new software and system provide smooth and simplified operating experience
The system supports displaying and comparison analysis of group of test data as well as unit conversions of test results.
Labthinks unique data security design by separating the test data from the computer, totally avoids the system software malfunctions caused by computer virus or faulty operations, conforms to the requirements for data traceability of China GMP (optional).
The instrument is equipped with USB ports and Internet ports for convenient data transmission.
Unique DataShieldTM system supports centralized management of test data and can be connected to other information management system.

Test StandardNote1

ISO 37, ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, JIS P8113, GB 8808, GB/T 1040.1-2006, GB/T 1040.2-2006, GB/T 1040.3-2006, GB/T 1040.4-2006, GB/T 1040.5-2008, GB/T 4850-2002, GB/T 12914-2008, GB/T 17200, GB/T 16578.1-2008, GB/T 7122, GB/T 2790, GB/T 2791, GB/T 2792, GB/T 17590, QB/T 2358, QB/T 1130

Applications

C610H is equipped with more than 100 grips for tests of more than 1000 materials. Customization is available for special material tests. Examples of instrument applications:

Basic Applications
Shearing Test
Test of Tensile Strength and Elongation Rate
Test of Tensile Strength at Break
Tear Resistance Test
Heatseal Strength Test
90 Degree Peel Test
180 Degree Peel Test
Tensile Strength Test at Defined Elongation
Extended Applications (Additional Accessories Required)
Puncture Test of Hypodermic Needles in Artificial Skin	Puncture Test of Films
Puncture Test of Infusion Bags	Puncture/Pullout Test of Flexible Rubber Closures
Opening Resistance Test of Combined Covers	Tear Test of ZD - Type Caps
Opening Force Test of Oral Liquid Caps	Puncture/Pullout Test of Oral Liquid Caps
90 Degree Pullout Test of Infusion Bag Caps	Pullout Test of Infusion Bag Caps
23 Degree Pullout Test of Bottle Caps	Puncture/Pullout Test of Bottle Caps or Rubber Closures
90 Degree Peel Test of Adhesive Tapes	Tear Resistance Test of Adhesive Binding Books
90 Degree Peel Test of Water-soluble Plasters	Tear Resistance Test of Adhesives
Adhesive Strength Test (soft)	Adhesive Strength Test (hard)
Peel Test of Flexible Tube Caps	Removal Force of Pipes and Pipe Joints
Pullout Test of Cosmetic Brush Hair	Pullout Test of Tooth Brush Hair
Tensile Strength of Ropes at Break	Opening Force Test of Jelly Cups and Yogurt Cups
Peel Test of Cup Films	Pullout Test of Rubber Stoppers
45 Degree Peel Test of Bottle Membranes	Tensile Strength of Sealing Bags
Peel Test of Magnetic Cores	90 Degree Peel Test of Magnetic Cards
Tear Resistance of Heat Sealing Films	Separating Force of Protection Films
Peel Test of Release Paper	Tear Test Using Trouser Method
Unwrapping Force of Adhesive Tapes	Compressive Resistance of Plastic Bottles
20 Degree Peel Test	135 Degree Peel Test of Plugs
Peeling Grips of Floating Rollers	Eccentric Grips
Wide Sample Grips	Japanese Sample Grips
British Sample Grips	Tensile Strength of Contact Lenses at Break
Compression Resistance of Jelly Cups	Compression Resistance of Package
Compression Resistance of Sponge

Technical SpecificationsNote2

Specifications	C610H Auto Tensile Tester
Load Cell Capacity	500 N (standard) 50 N, 100 N, 250 N, 1000 N (optional)
Accuracy	0.5% of indicated value (2%FS100%FS) 0.01%FS (0% 2%FS)
Resolution	0.001 N
Test Speed	0.05 500 mm/min
Speed Accuracy	0.5% of indicated value (1%100% of maximum speed)
Number of Specimens	1
Specimen Width	30 mm (Standard Grip)
Specimen Width	50 mm (Optional Grip)
Clamping Way	Pneumatic Specimen Clamp
Gas Supply	Air (outside of supply scope)
Gas Supply Pressure	0.5 MPa 0.7 Mpa (72.5psii101.5psi)
Stroke	1000 mm
Instrument Dimension	500 mm (L) 520 mm (W) 1900 mm (H)
Power Supply	220VAC10% 50Hz / 120VAC10% 60Hz
Net Weight	110 kg

Configurations

Standard Configurations: Instrument, Professional Software, Tablet, Pneumatic Sample Grips

Optional Parts: Standard Pressure Roller, Test Plate, Sample Cutter, Customized Grips, Laser Printer, Air Compressor, Computer System required by GMP, DataShieldTM Note3

Note: 1. The gas supply port of this instrument is I4mm PU Tubing;
2. Customers need to prepare gas supply.

Note 1: The described test standard, applications and product features should be in line with Technical Specifications.
Note 2: The parameters in the table are measured by professional operators in Labthink laboratory under strictly controlled laboratory conditions.
Note 3: DataShieldTM provides safe and reliable data application support. Multiple Labthink instruments can share one single DataShieldTM system which can be configured as required.

Advanced Digital Control and Data Handling

The tester incorporates a microprocessor-based system with an intuitive LED digital display, allowing operators to adjust speed and monitor results instantly. Data storage is made easy with onboard memory and optional USB connectivity, facilitating efficient record keeping and export for further analysis.

Reliable Safety Features and Rugged Construction

Equipped with an emergency stop button and safety shield, the tester guarantees user protection during operations. The powder-coated mild steel and stainless steel build offer resilience against routine laboratory wear, ensuring the equipment remains serviceable and accurate over time.

FAQ's of 90 Degree Peel Testers:

Q: How does the 90 Degree Peel Tester ensure precise adhesive strength measurement?

A: This tester maintains a fixed 90 peel angle with self-tightening grips and uses a precision stepper motor to deliver controlled, adjustable test speeds. Its microprocessor-based digital control guarantees accuracy, while the LED display provides immediate, highly resolved readings (0.1 N, 0.5% accuracy) within a range of 0-500 N.

Q: What is the sample handling process during peel testing?

A: Specimens up to 150 mm wide are mounted securely using standard self-tightening grips. The test is then executed based on the required speed and stroke (up to 500 mm), with data automatically recorded and displayed on the LED panel for quick analysis and export via USB if desired.

Q: When should calibration be performed on this equipment?

A: All testers are supplied with a calibration certificate for accuracy assurance. Periodic calibration is recommended, especially in laboratories with critical testing requirements, or after extensive use, to maintain reliable performance and compliance with quality standards.

Q: Where is this peel tester most effectively used?

A: The equipment is ideal for laboratory and quality control environments such as adhesive, laminate, tape, and label testing applications. It serves manufacturers, exporters, and suppliers who require consistent peel strength verification as part of product development and quality assurance processes.

Q: What benefits does the automatic data recording feature provide?

A: Automatic data recording facilitates seamless documentation of test results, minimizing manual errors. This feature supports efficient workflow, enables easy traceability of test data, and simplifies exporting results for further analysis or reporting using the Windows-compatible software and USB/RS232 interface.

Q: How is operator safety maintained during operation?

A: Safety is addressed through an integrated emergency stop button and protective safety shield, effectively reducing the risk of accidents or specimen mishandling, making the machine suitable for regular laboratory use and staff protection.

Tell us about your requirement

Price:

Quantity

Select Unit

50
100
200
250
500
1000+

Additional detail

Mobile number

Other Products in 'Packaging Testing Instrument' category

Adhesive Tack Tester to measure initial tack of the adhesive tape under JIS Z0237 Price : 50000 USD ($)/Set Minimum Order Quantity : 1 Gas Pressure : 0.5 MPa Number of Specimens : 5 Test Stroke : 50 mm Features : High precision, quick response, programmable settings, userfriendly interface Resolution : 1 gf Test Speed : 300 mm/min Response Time : <1 second Test Range : 01000 gf Specimen Size : 10 mm 60 mm Mounting Type : Benchtop Temperature : 10C 40C Operating Voltage : 220V AC Port Size : 6 mm Capacity : 1000 gf Accuracy : 1 gf Interface Type : RS232 Test Width : 10 mm Measuring Range : 01000 gf Power Supply : AC220V 10% 50/60Hz Frequency : 50/60 Hz Automation Grade : Semiautomatic Max Height : 250 mm Control Mode : Manual/Automatic Application : Measures initial tack of adhesive tapes according to JIS Z0237 Machine Weight : 25 kg Display Type : Digital LCD Humidity : 30%85% RH Usage : Laboratory/Quality Control Equipment Type : Adhesive Tack Tester Hardness : Standard work surface

Send Inquiry

Motorized Cap Torque Tester for Bottle Cap Testing Price : 50000 USD ($)/Set Minimum Order Quantity : 1 Gas Pressure : 0.4~0.8 MPa Number of Specimens : 1 Test Stroke : 150 mm Features : Motorized Operation, Adjustable Jaws, Overload Protection, Data Storage Resolution : 0.001 Nm Test Speed : 20~240 rpm (Adjustable) Response Time : 0.5 Sec Test Range : 0.5~20 Nm (Newton Meter) Specimen Size : Cap Diameter: 10~180 mm Mounting Type : Bench Top Temperature : 10~40C Operating Voltage : 220V 10% Port Size : Standard 1/4 Air Inlet Capacity : 20 Nm max Accuracy : 1% F.S. Interface Type : RS232/USB Test Width : 0~180 mm Measuring Range : 0.5~20 Nm Power Supply : AC 220V 50/60 Hz Frequency : 50/60 Hz Automation Grade : Automatic Max Height : 250 mm Control Mode : Touch Screen / Manual / Automatic Application : Bottle Cap Opening/Closing Torque Testing Machine Weight : 45 kg Display Type : Digital LCD Display Humidity : 85% RH Usage : Quality Control, Laboratory Testing Equipment Type : Motorized Cap Torque Tester Hardness : Tester Base: Highstrength Alloy

Send Inquiry

Moisture Barrier Property Tester (MVTR tester) Price : 50000 USD ($)/Set Minimum Order Quantity : 1 Gas Pressure : 0.20.4 MPa Number of Specimens : Up to 3 specimens per test Test Stroke : 0500 mm Features : High accuracy, fast analysis, multiple specimen testing Resolution : 0.01 g/m24h Test Speed : 1100 mm/min adjustable Response Time : Realtime acquisition Test Range : 0.1 1000 g/m24h Specimen Size : Customizable, standard 100 mm Mounting Type : Benchtop Temperature : 15C 45C Operating Voltage : 220V Port Size : 6 mm Capacity : Multistation chamber Accuracy : 0.01 g/m24h Interface Type : RS232, USB Test Width : Up to 350 mm Measuring Range : 0.1 1000 g/m24h Power Supply : AC 220V, 50 Hz Frequency : 50 Hz Automation Grade : Automatic with manual override Max Height : Approx. 60 cm Control Mode : Touch screen programmable control Application : Measurement of Water Vapor Transmission Rate for films, packaging, etc. Machine Weight : Approx. 52 kg Display Type : Digital LCD touchscreen Humidity : 10% 90% RH Usage : Testing moisture barrier property of material specimens Hardness : Industrial grade chamber

Send Inquiry

Testing Instrument for the Safety and Performance of Non-Metal Cars Interior Materials Price : 50000 USD ($)/Set Minimum Order Quantity : 1 Gas Pressure : 0.2 ~ 0.3 MPa Number of Specimens : Up to 3 Test Stroke : 150 mm Features : Automatic timing, multisample testing, programmable parameters Resolution : 0.01 cm Test Speed : (60 10) mm/min Response Time : 1 s Test Range : 0999 s (timing range) Specimen Size : (356 100) mm Mounting Type : Benchtop Temperature : Room Temperature (or as per test method) Operating Voltage : 220 V Port Size : 16 mm Capacity : Multiple specimen holders Accuracy : 1% Interface Type : Standard Interface (optional USB/RS232) Test Width : 12 mm Measuring Range : 030 cm (flame height) Power Supply : AC 220V/50Hz Frequency : 50 Hz Automation Grade : Automatic Max Height : Approx. 600 mm Control Mode : Automatic (Programmable Control) Application : Testing of nonmetal car interior materials for safety and combustion performance Machine Weight : 45 kg Display Type : Digital Display Humidity : 40%~85% RH Usage : Laboratory instrument for flame combustion resistance testing Equipment Type : Testing Instrument

Send Inquiry

SEND INQUIRY CALL ME FREE