Automatic Oxygen Transmission Rate Test of Contact Lens Manufacturer at Best Price

Automatic Oxygen Transmission Rate Test of Contact Lens Price And Quantity

Minimum Order Quantity 1 Set

Price Range 10000.00 - 130000.00 USD ($)/Set

Automatic Oxygen Transmission Rate Test of Contact Lens Trade Information

FOB Port Jinan

Supply Ability 10 Set Per Month

Delivery Time 7 Days

Packaging Details Standard Veneer Case

Main Domestic Market All India

Certifications ISO 9001, CE

Product Description

OX2/230 Oxygen Transmission Rate Test System is based on the coulometric sensor method and available for the OTR test of flexible films, sheets, foils and packages. It can test 3 specimens in one operation with independent results.

Principle:

The pre-conditioned specimen is mounted between the upper and lower chambers at ambient atmospheric pressure. One chamber contains oxygen or air and the other chamber is slowly purged by a stream of nitrogen. Due to the concentration difference between the two chambers, oxygen molecules permeate through the specimen into the nitrogen side and are taken to the coulometric sensor where proportional electrical signals are generated. The oxygen transmission rate is then obtained by analyzing and calculating the signals. For package samples, high purity nitrogen flows inside the package, and oxygen or air flows outside.

Standards:

ISO 15105-2, ASTM D3985, ASTM F2622, ASTM F1307, ASTM F1927, JIS K7126-2

Features:

Be used to measure oxygen transmission rate of film and package specimens.
Three test modes and is applicable to various materials with high, medium and low oxygen permeability.
High precision oxygen sensor.
Based on the equal pressure method.
Three diffusion cells integrated in one instrument for individual or multiple tests, which improves test efficiency by 3 times.
Be easily connected with 9 satellite bases together to accomplish up to 30 tests at the same time.
Wide range and high precision of temperature and humidity control, adding humidity to two sides of the specimen, to support various combinations of non-standard test conditions.
World leading pressure compensation technology ensures accurate and repeatable test results.

Technical Specification

Specifications	Film Test	Package Test (customization available)
Test Range	0.01~6500 cm3/m2 (standard) 0.07~65,000 cm3/m2 (optional)	0.0001~60 cm3/pkg
Number of Specimens	1~3 with independent test results
Resolution	0.001 cm3/m2	0.00001 cm3/pkg
Temperature Range	15^oC~55^oC (standard)
Temperature Accuracy	±0.1^oC (standard)
Humidity Range	0%RH, 35%RH~90%RH
Humidity Accuracy	±1%RH
Test Gas	Oxygen and air (outside of supply scope)
Specimen Thickness	3 mm (customization is available for other thickness)	/
Test Area	50 cm2	/
Specimen Size	108 mm x 108 mm	One package with temperature control device: specimen should be smaller than DIA 150 mm and lower than 380 mm
		Three packages with temperature control device: specimens should be smaller than DIA 100 mm, and lower than 380 mm
		No size limitation for tests without temperature control device
Carrier Gas	99.999% high purity nitrogen or nitrogen with 2% hydrogen (outside of supply scope)
Carrier Gas Pressure	0.28 MPa
Port Size	1/8 inch copper tubing
Instrument Dimension	690 mm (L) x 350 mm (W) x 360 mm (H)
Power Supply	AC (85~264)V (47~63)Hz
Net Weight	70 kg