Primary Tack Tester to measure initial tack of the adhesive tape under JIS Z0237

50000 USD ($)/Set

Get a Price/Quote

Product Details:

Temperature 20C to 30C
Automation Grade Semi-automatic
Max Height Approx. 250 mm
Test Range 0.01 N to 10 N
Application Initial tack measurement of adhesive tape as per JIS Z0237
Port Size 6 mm (air hose)
Operating Voltage AC 100V/220V, 50/60Hz
Click to View more
Share Your Product:

Request to Call Back Send Inquiry

Primary Tack Tester to measure initial tack of the adhesive tape under JIS Z0237 Price And Quantity

Minimum Order Quantity 1 Set
Price Range 50000.00 - 100000.00 USD ($)/Set
Price 50000 USD ($)/Set

Primary Tack Tester to measure initial tack of the adhesive tape under JIS Z0237 Product Specifications

Test Width 25 mm (standard)
Response Time < 100 ms
Measuring Range 0 ~ 10 N
Frequency 50/60Hz
Resolution 0.01 N
Humidity 40 to 70% RH
Power Supply AC 100V/220V, 50/60Hz
Capacity 10 N
Control Mode Automatic/Manual
Hardness Test bed > HR45
Number of Specimens 1 per test cycle
Test Speed 300 mm/min (standard, adjustable)
Test Range 0.01 N to 10 N
Machine Weight Approx. 24 kg
Application Initial tack measurement of adhesive tape as per JIS Z0237
Port Size 6 mm (air hose)
Operating Voltage AC 100V/220V, 50/60Hz
Automation Grade Semi-automatic
Temperature 20C to 30C
Usage Adhesive testing lab, Quality control
Max Height Approx. 250 mm
Test Stroke 80 mm / 90 mm (custom options possible)
Accuracy 1% FS
Interface Type RS232/USB
Display Type Digital LCD
Specimen Size 80 mm x 25 mm (L x W)
Mounting Type Benchtop
Gas Pressure 0.5 MPa
Equipment Type Primary Tack Tester
Features Microprocessor based measurement, auto force detection, data output capability

Product Description

Overview

Rolling Ball Tack Tester is designed for initial tack tests of pressure-sensitive adhesive tapes, adhesive bandages (plasters), labels, and protective films and etc.

Primary Tack Tester to measure initial tack of the adhesive tape under JIS Z0237

Principle
This tester employs the rolling ball method and tests the primary adhesive properties of the specimen by observing the adhesive effect occurred immediately after the rolling ball and the adhesive specimen come into contact.

Standards

Rolling Ball Tack Tester conforms standards of ASTM D3121, JIS Z0237, GB 4852

Features:
Rolling ball method
Adjustable angle

Technical data:

Adjustable angle	0 60
Panel width	120mm
Test area width	80mm
Standard steel balls	1/321inch

FAQ's of Primary Tack Tester to measure initial tack of the adhesive tape under JIS Z0237:

Q: How does the Primary Tack Tester measure the initial tack of adhesive tapes?

A: The tester evaluates initial tack using either the rolling-ball (ball tack) or probe tack method, selectable according to JIS Z0237 standards. It detects the force required for the adhesive to capture the test device, accurately measuring tack strength with a precision load cell.

Q: What are the benefits of using this tack tester in a quality control laboratory?

A: With features like high measurement accuracy (1% FS), automatic/manual control, overload protection, and efficient PC connectivity, the device boosts testing reliability and speeds up quality control processes, ensuring adhesives meet industry standards.

Q: When should I use the rolling-ball versus the probe tack method?

A: The rolling-ball tack method is recommended for quick, comparative evaluations, whereas the probe tack method is suitable for in-depth, quantitative analysis. Your selection depends on the specific adhesive and application requirements as stipulated by JIS Z0237.

Q: Where can this equipment be utilized effectively?

A: Ideal for adhesive testing laboratories and quality control environments, the Primary Tack Tester is well-suited for manufacturers, exporters, and suppliers in the adhesive tape industry. Its benchtop design and semi-automatic operation facilitate easy integration into lab procedures.

Q: What is the process for conducting a tack test with this instrument?

A: Mount your specimen using the provided jig, select either the ball or probe method, and set test parameters on the LCD display. The automated system runs the test and records force data, which you can export via USB/RS232 to a connected PC for analysis and reporting.

Q: How is data output managed and reported with this gauge?

A: The tester transfers recorded data directly to a PC through the USB or RS232 interface. Included software enables comprehensive data acquisition, analysis, and report generation, streamlining documentation for quality assessment and regulatory compliance.

Q: What accessories and protections come standard with the Primary Tack Tester?

A: Standard accessories include spare balls/probes, a mounting jig, calibration weights, and an operating manual. The system features built-in overload and emergency stop protections for operator and equipment safety during testing.

Tell us about your requirement

Price:

Quantity

Select Unit

50
100
200
250
500
1000+

Additional detail

Mobile number

Other Products in 'Packaging Testing Instrument' category

Key Packaging Performance Tests for Chocolate Packaging- Seal Strength Price : 50000 USD ($)/Set Minimum Order Quantity : 1 Temperature : Room temperature (10C35C) Automation Grade : Semiautomatic Max Height : 600 mm Usage : Quality control and R&D Machine Weight : 55 kg Test Range : 0500 N Test Speed : 10500 mm/min (adjustable) Operating Voltage : 220V Port Size : 6 mm Application : Seal strength measurement of chocolate packaging Control Mode : Microprocessorbased Capacity : 50 kg Power Supply : AC 220V, 50Hz Humidity : 40%80% RH Number of Specimens : up to 5 at a time Test Width : 30 mm (standard), customizable Resolution : 0.01 N Frequency : 50/60 Hz Measuring Range : 0.01500 N Response Time : <5 ms Features : Automatic peak hold, realtime display, overload protection Gas Pressure : 0.6 MPa (required for pneumatic version) Mounting Type : Benchtop Specimen Size : 150 mm x 30 mm (L x W, recommended) Accuracy : 1% of reading Display Type : Digital LCD display Interface Type : RS232 Test Stroke : up to 600 mm Equipment Type : Digital Seal Strength Tester Hardness : Tool steel clamps, HRC 4550

Send Inquiry

Tailored Permeation Testing Instruments for Packaging Industry Price : 50000 USD ($)/Set Minimum Order Quantity : 1 Temperature : 5C to 80C Automation Grade : Fully Automatic Max Height : 650 mm Usage : Permeation Rate Measurement Machine Weight : 45 kg Test Range : 0.01 to 10,000 g/m24h Test Speed : Selectable 20300 mm/min Operating Voltage : 220V AC Port Size : 1/8 inch Application : Packaging Industry Material Testing Control Mode : Microprocessor Based Capacity : Multiple samples per cycle Power Supply : 220 V / 50 Hz AC Humidity : 10% to 90% RH Number of Specimens : Up to 4 Test Width : 150 mm Resolution : 0.001 g/m24h Frequency : 50/60 Hz Measuring Range : 0.001 to 10,000 g/m24h Response Time : <5 seconds Features : Autocalibration, Realtime Data Logging Gas Pressure : 0.1 to 1 MPa Mounting Type : Tabletop Specimen Size : 150 mm 150 mm Accuracy : 0.01 g/m24h Display Type : Touchscreen Digital Display Interface Type : USB, RS232 Test Stroke : 080 mm Equipment Type : Tailored Permeation Testing Instrument Hardness : Industrial Grade

Send Inquiry

Peeling Strength Tester for masking Tapes Price : 50000 USD ($)/Set Minimum Order Quantity : 1 Temperature : 15C35C Automation Grade : SemiAutomatic Max Height : 350 mm Usage : Laboratory and industrial quality control Machine Weight : 45 kg Test Range : 050 N Test Speed : 300 mm/min (Standard), adjustable Operating Voltage : 220V AC Port Size : 6 mm air tube Application : Testing the peeling strength of masking tapes and other selfadhesive products Control Mode : Digital, microprocessorbased Capacity : 50 N Power Supply : 220V AC, 50 Hz Humidity : 85% RH Number of Specimens : 1 at a time Test Width : 0100 mm Resolution : 0.01 N Frequency : 50 Hz Measuring Range : 050 N Response Time : <1 s Features : Stable structure, microcomputer control, high precision, data output Gas Pressure : 0.50.7 MPa (compressed air) Mounting Type : Benchtop Specimen Size : 25 mm x 200 mm (W x L) Accuracy : 1% FS Display Type : LCD Digital Display Interface Type : RS232/USB (Optional) Test Stroke : 300 mm Equipment Type : Peeling Strength Tester

Send Inquiry

Leak Tester for Vacuum Packed Products Price : 50000 USD ($)/Set Minimum Order Quantity : 1 Temperature : 10C 40C Automation Grade : SemiAutomatic Max Height : 300 mm Usage : Package leak integrity testing Machine Weight : Approx. 18 kg Test Range : 0 90 kPa (adjustable) Test Speed : 030 cycles/min (adjustable) Operating Voltage : AC 220V Port Size : 6 mm Application : Testing for leaks in vacuum packed pouches, food, pharmaceuticals and similar packages Control Mode : Digital/Touch Control Capacity : 1 Vacuum Chamber Power Supply : AC 220V, 50Hz Humidity : 80% RH (noncondensing) Number of Specimens : 1 specimen/test Test Width : 250 mm Resolution : 0.1 kPa Frequency : 50 Hz Measuring Range : 0 90 kPa Response Time : 1 sec Features : Microprocessor controlled, easy operation, compact structure Gas Pressure : 0.40.7 MPa Mounting Type : Benchtop Specimen Size : Up to 250mm width Accuracy : 1% of reading Display Type : Digital LCD Display Interface Type : RS232 (optional) Test Stroke : 100 mm Equipment Type : Leak Tester for Vacuum Packed Products

Send Inquiry

SEND INQUIRY CALL ME FREE